PHT5C2 / PHTA24

With extra grip, the tool life increases and parts fall off faster from the machine. No clamps. So, even in the case of a change in the size of the stock, the sleeve segment is still parallel to the stock. Parallel clamping minimizes the “push back” of inventory, and requires less drag force to achieve the same grasping capabilities as traditional techniques.

The operator replaceable slot sealing system for HQC patent eliminates the need to return collet to the manufacturer, making the seal change.

For the Chuck-Style lathe

Using the 2-5 and a2-6 main shaft carpan type CHNC lathe, adopt the main shaft installation design, can be machined into the tie with the machine. The customer can machine the pull rod adapter, or HDB will do its nominal charge.

There is no need to sacrifice speed for accuracy.

Product description

16C/ 3J and LP210 single indexer and notary’s big board ear axis. A machinable 7-by-19 area in two adjustable centerline height surfaces. There is an a2-5 style plate bolt on the main shaft of the index or turntable. The height of center line 6 and 7 can be used as standard. Bearing pillow block supports rigid, accurate positioning, and can hold heavier load. Optional pillow block, add 275 feet of clamping moment. The fixed supply of multiple parts provides increased output. Load the second set to maximize the shortening time. 360-degree rotation depends on some gaps.

PHT5C2 / PHTA24 flat ear axis

Product description

Small plate ear axes for the 5C and LP160 single indexer and notarization. 4 X 10 “machinable areas in two surfaces that can adjust the height of the center line. The Collet style panel draws the nose of the 5C spindle on the nose of the Lp160 main shaft and the a2-4-style plate bolts. 4 and 5 “center height can be used as standard”. Bearing pillow block supports rigid, accurate positioning, and can hold heavier load. The fixed supply of multiple parts provides increased output. Load the second set to maximize the shortening time. The 360 degree rotation depends on the partial clearance.

PHTA25 plate ear

Leave a Reply

Your email address will not be published. Required fields are marked *